105
7.5.7 PTZ
7.5.7.1 General settings
General settings for PTZ control, e.g. control speed
Enable proportional pan:
Pan and tilt speeds are reduced in proportion to the zoom factor.
Enable preset freezing:
The video stream is paused briefly as the system switches from
one preset to another.
Preset speed:
PTZ speed when retrieving a preset.
Manual speed:
PTZ speed for manual control.
Auto-scan speed:
PTZ speed for auto-scan action.
Zoom speed:
General setting for the zoom speed.
Zoom status:
On-screen display duration for the zoom status.
PT status:
Angle display duration for the pan/tilt viewing direction.
Preset status:
Display duration for the preset number.
Resume time:
When the Dome is restarted, resume the action performed
xx seconds before the restart.
7.5.7.2 Preset / Tour / Pattern
Control keys:
Control keys for orientation of the PTZ camera head (left, right
etc.)
Zoom + / Zoom -:
Camera module zoom in and zoom out
Focus + / Focus -:
not used
Ap / Aperture -:
not used
Speed controller (+/-):
This controller can be used to adjust the pan/tilt speed.
Tab: Presets:
To configure a preset, first guide the camera to the desired
point incl. zoom setting, then select a preset row. Assign a
new name if necessary (standard is "Preset x"). Now press the
"Configure" button.
To call up a preset, select a preset row. A further “Call” option will then appear. There will also be
another option to delete the preset.
Tab: Patrol:
To configure a patrol, first select a patrol (e.g. 01), then press
the + button at the bottom of the patrol dialogue; this will then
add a new patrol step. Now select a preset, choose the length
of time to remain on this patrol step and set the speed for the
