99
SMTP Server:
Enter the SMTP outgoing mail server for your email provider here.
SMTP port:
Enter the SMTP server port here (e.g. 465 if you are using TLS). I.
Enable SSL:
enable if the email server uses SSL or TLS. The SMTP port may
have to be changed.
Interval/attached image:
Choose an image interval for attached images. /Option must be
enabled for attached images.
Authentication/
User name/
Password:
Enable this option if the SMTP email server requires
authentication. Enter the user name and password and confirm the
password for the account for sending email.
Recipient/recipient address:
Enter the email recipients with name and email addresses
(max. 3 recipients) here.
7.5.2.11 NAT
Enable port mapping:
The NAT (Network Address Translation) or port mapping function
automatically sets up port forwarding for access from the Internet
to the camera in the router (if the router supports this).
Mapping type:
Auto: automatic assignment of all ports
Manual:
manual assignment of all ports
7.5.2.12 HTTPS
Activate HTTPS:
enables the HTTPS function. This enables a secure
connection with connection certificate. Please note that
further steps are necessary for configuring the HTTPS
function.
Create a self-signed certificate:
enter all of the details required for the certificate. When
accessing the camera at a later point, the connection
must also be confirmed in the browser.
Install a signed certificate:
install a HTTPS certificate from an external provider.
When accessing the camera at a later point, the
connection is automatically accepted as secure (address
bar shows green).
