80
WDR:
wide dynamic function for improved display of high contrasts.
The WDR level should be reduced if the image displayed is too
bright.
Wide dynamic level:
select the WDR level. A higher level may increase image noise.
White balance:
you can select between different variants of white balance.
Digital Noise reduction:
function to reduce noise in the image. The higher the value, the
more noise is removed and the more static the image appears.
Noise reduction level:
select the DNR level
Mirroring:
this setting can be used to mirror the image horizontally or
horizontally and vertically.
Video standard:
Here you can set the mains frequency of the power supply
network.
The effective IR range will depend on the installation location. If there are
surfaces that absorb light or no objects that reflect IR light in the field of view,
the IR range will be reduced and/or the video image will be too dark.
Reflective objects in the immediate vicinity of the camera (e.g. roof gutter or
wall) may also result in the reflection of IR light, which can disturb the image.
7.5.1.2 Privacy masking
Preview area:
the preview of the video and privacy masks that have been set up are
displayed here. Privacy masks are drawn directly in the preview area.
Enable privacy mask:
enable/disable the privacy masks function.
Draw Area:
draw polygonal areas. The drawing mode is closed by clicking this
button again. The area drawn is blacked out and so cannot be seen in
the live image or in the recording.
Delete all:
delete a privacy zone mask