Abus FUMO50110, Installation Instructions And User Manual, Page: 52 / 267

Technical data
52 | EN
Tamper protection (de-
tection/protection) Type B (EN 50131-3:2009 Section 8.7)
Energy supply type Hybrid module and external power supply
Type A (EN 50131-1:2006 + A1:2009 + A2:2017 Section 9 and EN
50131-6:2017 Section 4.2) for external power supply via power sup-
ply unit and batteries as a backup power supply.
Type B (EN 50131-1:2006 + A1:2009 + A2:2017 Section 9 and EN
50131-6:2017 Section 4.2) for external power supply via power sup-
ply unit and batteries as a backup power supply.
Power supply compliant with EN 50131-1:2006 + A1:2009 + A2:2017
9.2 and EN 50131-6:2017 when using an external power supply
which meets these requirements, if installed correctly together with
Secvest FUAA50xxx.
Voltage monitoring During operation with an external power supply , a fault report is
sent to the alarm panel as soon as it
•
indicates a main power supply fault (MAINS FAIL)
•
indicates a backup power supply fault (LOW BATT)
•
supplies a too-low direct current
o
The voltage for a fault is nominally
10.0 V with a tolerance of /- 0.5 V.
The user is informed.
Operating voltage 10.5-15 V DC, 12 V nominal (external power supply unit)
Power consumption,
maximum
Power consumption,
maximum
I DC maximum:
100 mA @ 12 V DC
defined by:
Standby current 35 mA
10 zones for 2-wire CC +7 mA
Mains Fail, Low Batt and TR-0 V (jumpers) +3 mA
Relay OP1-4 ON +55 mA
Total 100 mA
TX on +5 mA
Loudspeaker, maximum volume, @16 ohms +270 mA
without aux load