25
Note:
For uneven walls we recommend using the adapter for the anti-removal wall contact.
Remove the front cover of the sensor by unscrewing the Allen screw using the Allen key
provided.
[Fig. 3.1]
The cover can then be swung down out of its groove and lifted off.
[Abb.
3.3]
If this is not possible, use the special plastic tool provided in the scope of delivery
[Fig.
3.4]
to loosen the cover by carefully levering sideways to the left and right without
damaging it.
[Fig. 3.2]
Fig. 3.4
Fig. 3.1
Fig. 3.3
Fig. 3.2
