74
RECORD DURATION
Set here the record duration time when motion is detected. If motion is continuously
detected, the duration time is added to the total detection time.
For example, the duration is set to 10 seconds and the motion last for 3 minutes, the DVR
records for 3 minutes and 10 seconds.
NUMBER OF CELLS TO DETECT
Select here the amount of cells where motion has to be detected to trigger motion alarm.
The smaller the number is, the more sensitive the detection is.
MOTION MASK SETUP
MOTION SETUP
CELL [1]
[1/2/3/4] CHANGE CHANNEL
[
▲
/
▼
/
◄
/
►
] MOVE CURSOR
[MODE] CHANGE EDIT MODE
[ENTER] EDIT, [MENU] EXIT
Here you can setup which area shall detect
motion. The area that is marked not to
detect motion is Grey.
Use the direction buttons to move the cursor
and press [ENTER] to mark the area.
Press the [MODE] button to change editing
mode.
1. Cell
: Move to the desired location and
press [ENTER] to activate or deactivate the
motion detection in the marked area cell by
cell.
2. ALL ON
: Change the mode to ALL ON and press ENTER to activate the motion detection
in the whole window.
3. ALL OFF
: Change the mode to ALL OFF and press ENTER to deactivate the motion
detection in the whole window.
4. BLOCK ON
: Move the cursor to a corner cell of the desired area and press ENTER to
mark the starting cell of the block. Then, move the cursor to the cell at the diagonal end of
the desired area and press ENTER to finish marking the block.
5. BLOCK OFF
: The setup steps are the same as BLOCK ON to deactivate a marked
block.
CELL [1]
Channel
Edit
mode
