Abus CASA10010, Installation Instructions Manual

Page: 30 / 123

30
3. Component names
3.1 Display
The LEDs on the IP alarm module light up depending on the event
detected. The diagram gives an overview of the displayed events.
The LEDs have the following meaning:
In addition to their use in standard operation, the LEDs also display
the selected function during programming. Observe the notes on
the respective function descriptions.
LED lights up:
12 V DC power supply present
LED flashes (1 Hz):
The module has been tampered with
LED lights up:
Wireless jamming detected
LED flashes (1 Hz):
Supervision fault (corresponding
channel LED lights up at same time)
LEDs light up (approx. 5 sec.):
The wireless component trained in the
corresponding channel has sent a signal
LEDs flash (1 Hz):
The wireless component trained in
the corresponding channel has been
tampered with
LEDs flash (5 Hz):
The wireless component trained in the
corresponding channel has a low battery