ABTronic SPORT-ELEC MULTISPORTPRO, User Manual

Page: 14 / 54

EN
CT
CS
JA
14
- USER MANUAL
GUIDANCE AND MANUFACTURER’S DECLARATION
ELECTROMAGNETIC IMMUNITY
The Multisport PRO is intended for use in the electromagnetic environment specified below. The customer or the user of the Multisport PRO should assure
that it is used in such an environment.
IMMUNITY
TEST
IEC 60601
TEST LEVEL
COMPLIANCE
LEVEL
ELECTROMAGNETIC ENVIRONMENT – GUIDANCE
Conducted RF IEC
61000-4-6
3 Vrms
150 kHz to 80 MHz
3 Vrms Portable and mobile RF communications equipment should be used no
closer to any part of the Multisport PRO, including cables, than the recom-
mended separation distance calculated from the equation applicable to
the frequency of the transmitter.
Recommended separation distance d=1.67√P
d=1.67√P 80 MHz to 800 MHz d=2.333√P 800MHz to 2,5 GHz
where P is the maximum output power rating of the transmitter in watts
( W ) according to the transmitter manufacturer and d is the recommended
separation Distance in metres (m).
Field strengths from fixed RF transmitters, as
determined by an electromagnetic site survey,a should be less than the
compliance level in each frequency range.b
Interference may occur in the vicinity of equipment marked with the
following symbol:
Radiated RF IEC
61000-4-3
3 V/m
80 MHz to 2.5 GHz
3 V/m
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.
a. Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio,
AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment
due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the
Multisport PRO is used exceeds the applicable RF compliance level above, the Multisport PRO should be observed to verify normal operation.
If abnormal performance is observed, additional measures may be necessary, such as re-orienting or relocating the Multisport PRO.
b. Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.