background image

18

EN/US/CA/A.mist A.mistT/UM-2239-1

Subject to alteration without prior notice.

A number of accessories are available for the type A•mist

 Absolent oil mist filter. Installation instruc-

tions for these are described on the following pages. However, note that the products must be 

ordered separately.

ACCESSORIES

13

Return Liquid Hose

The return liquid hose is designed for connection to the 

return oil pipe of the filter unit. The outlet of the liquid trap 

is not to discharge liquid in such a way that the liquid can 

damage adjacent building elements. 

Correct installation of the liquid trap is very important due 

to the normal subatmospheric pressure inside the filter 

unit. 

It must fit tightly against the filter unit and the outlet 

must be lower than the liquid level.

Liquid trap

The liquid trap is designed for connection to the return oil 

pipe of the filter unit. 

The outlet of the liquid trap is not to 

discharge liquid in such a way that the liquid can damage 

adjacent building elements. Correct installation of the liquid 

trap is very important due to the normal subatmospheric 

pressure inside the filter unit. It must fit tightly against the 

filter unit and it must be filled with liquid.

To be able to use this liquid trap, the filter unit has to be 

placed 

on extension legs (13.2) or a mezzanine.

Receptacle

The liquid trap receptacle is designed for connection to the 

return oil pipe of the filter unit. It consists of a tight recep

-

tacle that is transparent enabling the operator to see the 

level of liquid in the receptacle.

  

Correct installation of the liquid trap is very important due 

to the normal subatmospheric pressure inside the filter 

unit. 

It must fit tightly against the filter unit.

To be able to use this liquid trap, the filter unit has to be 

placed 

on extension legs (13.2).

LIQUID TRAPS

13.1

Steel bucket

The steel bucket liquid trap is designed for connection 

to the return oil pipe of the filter unit. It consists of a tight 

bucket with a fitted level indicator enabling the operator to 

see the level of liquid in the bucket.

Correct installation of the liquid trap is very important due 

to the normal subatmospheric pressure inside the filter 

unit. 

It must fit tightly against the filter unit.

To be able to use this liquid trap, the filter unit has to be 

placed 

on extension legs (13.2).

Summary of Contents for A-mist6C





























Reviews: