Absco Industries
Assembly Instruction Manual
GABLE SHED
N3/C1 FRAME KIT
FOR PREMIER MODELS
Model: CYCGK
02/03/21
1.5
14
BRACING FOR REAR WALL
3.0m wide sheds
Cut C3650 to 2900 mm
2.3m wide sheds
Cut C3650 to 2160 mm
1. Take the two C3650 pieces of framing for
the back wall and partially box them together,
do not tek screw yet
.
2. Place the unscrewed box section against
the wall, in the orientation pictured, and slide
the two pieces apart until they make contact
with the side walls.
The result should look similar to what is
pictured to the right.
3. Once the correct lengths have been
determined proceed to fix them with tek
screws at every second corrugation as
described in BOXING FRAME SECTIONS.
4. Now secure to the rear wall with tek screws
from outside the shed at 148mm spacings.
This is best done with two people.
Side wall
80mm
Back wall
Bracing installed on the back wall.
