Absco Industries
Assembly Instruction Manual
Model: CYC15
02/03/2021
1.0
6
N3/C1 FRAME KIT
FOR 1.5m WIDE TO
1.5m DEEP MODELS
INSTALL EXTRA FASTENERS - INTERIOR VIEW
means pre-drill 3mm hole
and fix with FAST001
D
“
G”
- Wall sheet to top wall channel.
Pre-drill from inside the shed through the inside face of the top channel and into the wall sheet
at
148mm
centres, (every pan) and then fix with a screw. Do this on the front and back walls only.
Additional FAST001 for rear wall
Additional FAST001 for front wall.
“
C”
- Roof panel to ridge beam.
Pre-drill from inside the shed upward through the ridge beam and into the roof panel at
148mm
centres, (every pan) then fix with a screw. Some screws will already be in these positions, skip these.
For illustrative purposes fasteners are shown on just one side of the
ridge beam.
Repeat again to other side.
