Absco Industries
Assembly Instruction Manual
Model: CYC15
02/03/2021
1.0
17
N3/C1 FRAME KIT
FOR 1.5m WIDE TO
1.5m DEEP MODELS
Bolt and Nut*
M10 4.6/S
Steel Angle*
35 x 35 x 3
M10 Dynabolt*
* Denotes hot dip galvanised fi nish
Wall Sheet
Slab
ANCHORING METHODS
Fixing M10 dynabolt requires drilling into the
concrete slab using a masonry bit. Holes must have
a minimum slab edge distance of 60mm.
Bolt and nut through the wall sheet requires the
drilling of a 10mm hole through the wall sheet.
Inside view of typical anchor.
Outside view of typical anchor
Door stud have a single anchor through a
BKT17. Fixed by four tek screws.
2
12 anchors in total.
3 per wall, spaced evenly.
2
2
