background image

ABSCO INDUSTRIES 

ASSEMBLY INSTRUCTION - MODEL: 45232WK 24/02/17

    

      

Absco Workshop Shed

Model: 45232WK

ABSCO ASSEMBLY INTRODUCTION

FASTENING SYMBOLS

The snap-tite assembly system locks all perimeter channels to all roof and wall
sheets without the need for tools and fasteners .

To pre-assemble the four wall panels
and two roof panels, the perimeter
channels are secured to the top and

bottom of each panel using the

snaptite system, as detailed on the
following pages wherever you see
the symbol.

Position sheets on timbers,

trestles or partly over edge of

concrete slab.

Each perimeter channel must finish flush

with the edges of the sheets. the snap-tite
system allows adjustment for this

process by simply tapping the channel

along the sheets until each end is neatly
flush.

Join components together with one screw at this

location only, as some channel sections have extra
holes that are not required for this model of garden

shed

Do not join components together at this location yet,

as the screw may obstruct further assembly of other
components

4mm NUT & BOLT SET

3mm POP RIVETS

PUSH

PUSH

HIGH SIDE

HIGH SIDE

PUSH

HIGH SIDE

HIGH SIDE

After joining sheets together,

position channel over one end of the

sheets, gently tapping it over the
snaptite lugs, working along the
sheets to the other end.

HIGH SIDE

SNAP

T TE

i

SNAP

T TE

i

SNAP

T TE

i

SELF DRILLING TEK SCREW

FOR JOINING MID-FRAME
COMPONENTS

 PAGE 14

Summary of Contents for 45232WK






































Reviews: