PAGE 17
Absco Highlander Shed
Model: 3060HGK
INSTRUCTIONS
AND VIDEOS
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: 3060HGK 01/07/16
TRIM THE PERIMETER
CHANNELS BY 16.5mm TO
ALLOW EDGE RIBS OF THE
SHEETING TO BE OVERLAPPED.
16.5 16.5
JOINING WALL & ROOF PANELS
THE 2993mm LONG PANELS NOW NEED TO BE JOINED TOGETHER, TO MAKE ONE
CONTINUOUS PANEL, FOR EACH ROOF AND WALL SECTION. THE PERIMETER
CHANNELS WILL HAVE TO BE REDUCED IN LENGTH EQUAL TO THE AMOUNT OF THE
OVERLAP, AS SHOWN BELOW.
OVERLAP THE PANELS AND SECURE WITH SCREWS AS SHOWN.
REFER TO THE PANEL CONSTRUCTION SECTION OF THIS INSTRUCTION FOR FURTHER
DETAILS, AND ENSURE THAT THE PANELS ARE NOT JOINED TOGETHER WITH
PRE-PUNCHED HOLES INCORRECTLY POSITIONED.
THE OVERALL LENGTH OF EACH PANEL SHOULD BE THE SAME
LENGTH AS THE RIDGE BEAM, WHICH IS 5953mm.
RIDGE BEAM/PANEL LENGTH = 2993
LESS CUT OFF SECTION
= 16.5
NEW LENGTH
= 2976.5
TWO PANELS JOINED: 2976.5 X 2 = 5953mm
IT IS NOT CRITICAL THAT THE OVERALL LENGTH OF 5953mm IS
EXACT, BUT TRY AND MAINTAIN THE LENGTH WITHIN 5mm.
