PAGE 24
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: 3060HGK 01/07/16
AN EASY WAY TO ENSURE THAT THE ANGLE AT
THE TOP OF THE PORTAL FRAME IS CORRECT IS
TO USE THE GABLE WALL PANEL AS A
TEMPLATE TO LAY THE SECTIONS OUT. AS THE
PORTAL FRAME FITS INSIDE THE WALLS, THE
WIDTH OF THE FRAME WILL BE 40mm LESS THAN
THE GABLE WALL PANEL.
FRAME ASSEMBLY
PART C1482
PART C1954
1 x KNEE
PLATE
2 x APEX
PLATES
1 X KNEE PLATE
REFER TO THE
FOLLOWING PAGE FOR
FURTHER DETAILS.
NOTE: IF YOU HAVE AN EDGE REBATE IN YOUR CONCRETE SLAB, YOU WILL HAVE TO CUT
AN AMOUNT OFF THE BOTTOM OF THE FRAME LEGS EQUAL TO THE DEPTH OF THE REBATE.
HIGH-PORTAL FRAME DETAILS
Absco Highlander Shed
Model: 3060HGK
INSTRUCTIONS
AND VIDEOS
2950mm
80mm
80mm
2033mm
2295mm
REFER TO PAGE 5 FOR HIGH-PORTAL
FRAME PARTS AND ACCESSORIES
NOTE:
PLEASE REFER TO THE PHOTOS ON
PAGES 41-48 FOR CLARITY
NOTE:
16R
16L
NOTE: THESE FRAMES WILL NEED TO BE TRIMMED 25mm
TO FIT REBATE
