Installation and Operating Instructions
3
ABS Control panel CP114
GB 0825-A
Options
Backup-battery 12 V; 1,2 Ah (part-no. 6216 0961)
It is possible to operate parts of the PC111 unit independent of mains. An integrated charger functions as a
FRQVWDQWEXIIHUIRUWKHEDWWHU\0RUHLQIRUPDWLRQVHHPDQXDORIWKH3&7KHUHWUR¿WEDFNXSNLWLQFOXGHV
9OHDGDFLGEDWWHU\$K¿[EUDFNHWZLULQJNLWDQGLQVWDOODWLRQJXLGH
Thermostatic controlled heater 230 V, 10 W (part-no. 6216 0088)
If unfavourable mounting is necessary e.g. outdoor installation, a thermostatic heater can be installed inside of
WKHVWHHOFDELQHW$UHWUR¿WNLWLQFOXGHVWKHUPRVWDWKHDWHU:IXVH$ZLULQJNLWDQGLQVWDOODWLRQ
guide.
External alarm unit (audio-visual) 12 VDC (part-no.: 6216 0978)
The external alarm unit combines a 12 VDC LED-alarm light and a piezo-buzzer IP65, mounted in plastic box
IP66.
All fundamental settings and operating steps are described in the standard manual of the PC111 (part-no.
$WKH\UHPDLQYDOLG$GGLWLRQDOO\\RXZLOO¿QGWKHIROORZLQJSDUDPHWHUVLQWKHVWDUWPHQXRSWLRQ
¿JXUH
Menu item
Value
Comment
Stop criteria
6WRSÀRDW
VWRSFULWHULDXVLQJÀRDWV
New Functions
Ľ
Relay 2 function
[Reversing pump, Start Cap., Off]
Reversing if fault. Activated by output
LO1 from VFD.
Rev. Delay time
Minutes
Delay reverse function, so that the
pump can stop.
Rev. Run time
Seconds
Running time in changed direction.
Max. no Attempts
1 - 3
After reversion the pump starts. Pro-
cedure is considered as successful if
at least the running time of the “Rev.
delay” is reached.
After that the counter will be reset. If
fault occurs again, next start attempt,
max. 3 attempts possible. All further
attempts stop the pump, created alarm
have to be reset manually.
P1 Rel. when Rev.
ON - OFF
Function of relay 1 during reversion of
rotation (
MUST BE
in position „OFF“).
Curr. Sensor P1
ON - OFF
Position „OFF“. Current measuring
occurs via VFD.
•
•
•