
P a g e
| 20
For Swinging door units, pay particular attention to the gasket and its seating
surfaces. Any debris buildup on these can cause air leaks into the compartment
resulting in condensation as well as reduced efficiency.
CONDENSER MAINTENANCE
IMPORTANT WARRANTY INFORMATION
Air is pulled through the condenser continuously during operation. Along with
this air come impurities like dust, lint, grease, etc.
These impurities accumulate in the condenser. Dirty condensers result in
inefficient operation, compressor failure and potential product loss which are
not covered by warranty.
If you keep the condenser clean, you will minimize your service expense and
lower your electrical costs. The condenser requires scheduled cleaning every
30 day (or more frequently in dirty environments).
Proper cleaning involves removing dust from the condenser. This can be
accomplished using a soft brush, by vacuuming, and by blowing through the
condenser coils with pressurized air, CO2, or nitrogen.
REMEMBER, THE CLEANING OF THE CONDENSER IS NOT COVERED BY
THE WARRANTY AND IS YOUR RESPONSIBILITY. ANY DAMAGE CAUSED
BY FAILURE TO KEEP THE CONDENSER CLEAN IS ALSO NOT COVERED BY
THE WARRANTY.
CLEANING THE CONDENSER
1.
Disconnect the electrical power to the unit
2.
Removed the louvered grill at the base of the unit. Locate the condensing
unit.
3.
CAUTION: Use eye protection while performing the steps 4-6 to avoid eye
injury.