Part number 20080, Rev 0
4
INSTALLATION
UNCRATING
Move your refrigerator as close to the final location as possible before unpacking. Remove the
wooden planks or skid. The location should be as close as possible to the power outlet so the
extension cord is not needed. This unit requires a
minimum of 4 inches of air flow space in
back and 3 inches on the sides.
Do not store material on the top of this unit and leave at least
12 inches of clearance on top.
PLEASE NOTE!
Your refrigerator or freezer is designed for
INDOOR USE and should be operated in an air conditioned space
with temperature between 65°F to 85°F.
POWER SOURCE
The supply circuit to this cabinet must
conform to all National and Local
Electrical Codes. Consult the cabinet
Serial-Data plate for voltage, cycle,
phase, and amp requirements before
making connection. VOLTAGE SHOULD
NOT VARY MORE THAN 5% FROM SERIAL
PLATE RATINGS. A separate circuit is
recommended to prevent possible loss of product due to over-loading or failure of other
equipment on the same circuit. PROTECT THE CIRCUIT WITH A 20 AMP DELAY-TYPE FUSE OR
CIRCUIT BREAKER. Do not use an extension cord. Be sure your
unit is properly grounded. Use the 3-prong plug provided into a
3-prong grounded outlet. (Only this method complies with
national electrical codes, local codes and ordinances.) Unless the
above grounding method is followed, you are not protected
against severe or lethal shock in the event of a short circuit of an
electrical component or wiring of the unit.
