Installa
ti
on instruc
ti
ons for the OPEN Classic out of pool automa
ti
c safety cover - 8/20
8
3.2.8 Fig.
12
If the posts cannot be placed tightly, install a
blocking ring which should be ordered from us.
3.3 Placing the roller on the pool
3.3.1 Check that the sha
ft
and the posts are level
(horizontally and squared) and that the rolling tube
is centred on the line formed by 1 and 3 (see Fig. 2
and Fig. 5).
3.3.2 Fig.
13
Measure the distance between the posts and use it
to place the plates on the ground and make marks
for the drilling.
3.4 Preparing
the
fi
xtures
Fig. 14
3.4.1 Drill 10 mm diameter holes penetra
ti
ng the
concrete belt 100 to 120 mm.
3.4.2 Clean the holes by blowing.
3.5 O
ff
set plate op
ti
on:
fi
xture to the ground
Fig. 15
Prepare the threaded rods for a
tt
aching the plates
to the ground le
tti
ng them protrude 15 mm from the
plate.
Fig. 12
Fig. 15
15mm
15
mm
Fig. 13
x
x
x
x
Fig. 14
D.10
100 mm min.