background image

Installa

ti

 on instruc

ti

 ons for the OPEN Classic out of pool automa

ti

 c safety cover - 6/20

6

2. Delivery and Recep

ti

 on

2.1 Delivery

Fig. 6

2.1.1  Plan the presence of 2 to 6 persons, or use a 

handling device to handle the cover. The cover is 
delivered in a non-recoverable wooden container 
measuring at least 40 cm more than the width of 
the pool. It is heavy and fragile.

2.1.2  For a 4 x 8 pool, the container weighs 290 Kg and 

measures 4.6 x 0.6 x 0.8 (h).

2.1.3  For a 5 x 10 pool, the container weighs 390 Kg and 

measures 5.6 x 0.6 x 0.8 (h).

2.2 Recep

ti

 on

2.2.1  Open the container in the presence of the delivery 

sta

  and check the condi

ti

 on of the goods and their 

compliance. Keep the original packing.

2.2.2  If there is any damage or missing parts, write 

down your reserves on the transport documents 
(e.g.: container open on delivery). The words 
"subject to unpacking" alone are null and void. 
Send a registered le

tt

 er (with acknowledgement of 

receipt) to the transporter within 2 days. This le

tt

 er 

must give an exact descrip

ti

 on of the damage. Send 

a copy of the le

tt

 er to AS POOL for informa

ti

 on. 

2.2.3  Store the parts in the container which should not 

be le

ft

   in full sunlight, but should be placed in a cool 

place if the assembly is not carried out on the same 
day.

2.2.4  Make the inventory compared to the order.

2.2.5  Read the instruc

ti

 ons completely before star

ti

 ng 

the assembly.

2.2.6 The 

installa

ti

 on requires 2 persons for 4 hours.

2.3 Necessary 

tools

Fig. 7

Plan the equipment necessary for assembly: a 
perforator, a set of 

fl

 at spanners, socket wrenches and 

hex keys, a set of screwdrivers, a mallet, pliers, a level, 
a glue gun, a cu

tt

 er, a mul

ti

 meter, a tape measure, a 

grinder, a marker and a saw.

2.4   Items in the container 

 

- A slat apron

 

- A motorised roller sha

ft

 

 

- Two posts to support the sha

ft

 

 

- A 19 x 25 cm box

 

- A 

fi

 xture kit

 

- Installa

ti

 on instruc

ti

 ons

Fig. 7

x 2

4:00

Fig. 6

0.8m

x

0.6m

l

4.2

4.7

5.2

6.2

7.2

8.2

9.2 10.2 11.2 12.2

X

4.6

5.1

5.6

6.6

7.6

8.6

9.6 10.6 11.6 12.6

0.6 m

0.8 m

x

Summary of Contents for OPEN Classic





























Reviews: