above Height Series, User Manual

Page: 19 / 80

13
It is not recommended to change the wind sensor settings
unless necessary. Changing this setting will cause the
umbrella to close when the wind sensor detects that wind
speed.
7. Setting Wind Sensor Sensitivity
2. Rotate the wind sensor 60°counterclockwise to align the “ “ on the lower side of the
wind sensor with the “ “ on the upper side of the control board. Remove the wind
sensor form the control board.
1. Remove the control board by rotating the control broad 60°counterclockwise from the
motor until “ “ on the lower side of the control broad until it is aligned with “ “ on
the upper side of the motor. Remove the control board from the motor.