Chapter 4: Web Configuration
22
and AP+WDS mode. Under Client mode, there is only Client mode can be
selected.
Multiple APs
This page shows and updates the wireless setting for multiple APs.
User can set up the multiple AP here. To enable one of the APs from 1~4,
then setup the wireless settings from the pull-down list.
Network Type
If the mode be set to Client mode that the network type can be set to
Infrastructure or Ad hoc.
Network Name
(SSID)
A SSID is referred to a network name because essentially it is a name that
identifies a wireless network(case-sensitive).
Channel Width
This function will be available under 2.4GHz (N)
,
2.4GHz (G+N)
,
2.4GHz
(B+G+N) mode. Select 20MHz the channel number will be form 5~11 and
auto; Select 40MHz channel width the channel number will be form 1~11
and auto. Default is 40MHz.
Control Sideband
This function will be available under 2.4GHz (N)
,
2.4GHz (G+N)
,
2.4GHz
(B+G+N) mode. Select upper or lower form the pull-down list, default is
upper.
Channel Number
The channel number base on the channel width you select.
Broadcast SSID
Enabled
:
This Wireless Router will broadcast its network name(SSID) to
stations.
Disabled
:
This Wireless Router will hide the network name to stations. If
stations want to connect to this Wireless Router, this Router’s network
name(SSID) should be known in advance to make a connection.
WMM
The Wi-Fi Multiple Media function is available under 2.4GHz (B), 2.4GHz
(G) and 2.4GHz (B+G) band, and it is
disabled
under 2.4GHz (N), 2.4GHz
(G+N) and 2.4GHz (B+G+N) band.
Data Rate
There are several data rate that you can select from the pull-down menu.
Associated Clients
Click
Show Active Clients
button to show all connected clients.
Enable Mac Clone
(Single Ethernet
Client)
This function will be enabled under Client mode.
Enable Universal
This function will be enabled under AP mode.
