Chapter 4: Web Configuration
56
Bandwidth Mgmt
Enable Bandwidth
Management
Check the box to enable this function. If the DMZ Host Function
is enabled, it means that you set up DMZ host at a particular
computer to be exposed to the Internet so that some
applications/software, especially Internet / online game can have
two-way connections. You can select automatic or manual uplink
speed.
Automatic Uplink/Download
Speed
Check the box to enable the automatic uplink/ download speed
function.
Manual Uplink/Download
Speed
You can manually enter the uplink/ download transmission rate in
the blank field.
Address Type
Select IP or MAC address type.
Local IP address
MAC address
Depend on the address type that selected, user can enter the IP
address or MAC address of client to set up the bandwidth of the
transmission.
Port
Enter the beginning of port range numbers used by the service. If
the service uses a single port number, enter it in both the start and
finish fields.
Protocol
Select the protocol (TCP, UDP, TCP/UDP, ICMP or ANY) used
to the remote system or service.
Mode
Select Guaranteed minimum bandwidth or Restricted maximum
bandwidth modes.
Uplink Bandwidth (Kbps)
Enter the Uplink Bandwidth (Kbps) in the column.
Downlink Bandwidth (Kbps)
Enter the
Downlink Bandwidth (Kbps) in the column.
Comment
Enter the note for the setting.