Chapter 4: Web Configuration
33
WPS
Disable WPS
Check the box to disable the WPS function, default setting is enabled.
WPS Status
Here shows the current status of the WPS function. Default setting is
Configured, click
Reset to UnConfigured
to re-configured the WPS
connection.
Self-PIN Number
Here shows the 8-digit numbers PIN code of the router itself.
Enter the
Self-PIN Number
to client (Registrar) end and click the PIN
button at the client end to make a WPS connection. It will connect with the
wireless router within two minutes and get IP address.
Push Button
Configuration
Click
Start PBC
button (or press the physical WPS button on the Wireless
Router once), meanwhile, the client should also click the PBC button
simultaneously within 2 minutes.
Current Key Info
This table shows the security status of the Wireless Router. If user would
like to set up the security, please go to
Wireless > Security
.
Client PIN
Number
Enter the client(Enrollee) PIN code into the blank field then click the
Start
PIN
button to make a WPS connection with client. Then, the wireless router
will connect to client within 2 minutes and get IP address.
