10
of the requested transmission.
If the “Hidden Node” problem is an issue, please specify the packet size.
The
RTS mechanism will be activated if the data size exceeds the value you set.
The default value is
2346
.
Warning: Enabling RTS Threshold will cause redundant network
overhead that could negatively affect the throughput
performance instead of providing a remedy.
The value can be set from 0 to 2346.
This value should remain at its default
setting of
2346
. Should you encounter inconsistent data flow, only minor
modifications of this value are recommended.
Beacon Interval
: Beacon Interval is the amount of time between beacon
transmissions. Before a station enters power save mode, the station needs the
beacon interval to know when to wake up to receive the beacon (and learn
whether there are buffered frames at the access point).
Inactivity Time
: By default, the unit adaptively selects the highest possible
rate for transmission. For most networks the default setting is
30000
that is
the best choice. If obstacles or interference are present, the system will
automatically fall back to a lower rate.
Preamble Type
: A preamble is a signal used in wireless environment to
synchronize the transmitting timing including Synchronization and Start
frame delimiter. If you want to change the Preamble type into
Long
or
Short
, please select the mode you need.
Broadcast SSID
:
•
Enabled
: This wireless AP will broadcast its SSID to stations.
•
Disabled
: This wireless AP will not broadcast its SSID to stations. If stations want
to connect to this wireless AP, this AP’s SSID should be known in advance to
make a connection.
WMM
: Select
Enabled
or
Disabled
to execute WMM function.
Apply Changes
: Click to save and apply the current setting.
Reset
: Click to clear and reset the current settings.
