ABNOX AXFP2-Light Series, Operating Manual

Page: 20 / 108

20
• Deficient monitoring of the machine parts that are
subject to wear.
• Improperly completed repairs or use of third-party
components.
Product Description
Intended Use
The system is designed solely for pumping the
following media:
• Lubricants with a viscosity of
NLGI 4/1‘000‘000 mPa s or less
• Container size according to the datasheet
Labelling
The drum pump is identified by the rating plate loca-
ted on the back of the pump lifter (Figure A/
no. 1). The rating plate contains information for
identifying the device.
Function
Pneumatic ABNOX drum pumps are used to pump
lubricants from original containers. The suction beha-
vior of the standard ABNOX pumps is improved con-
siderably by the adjustable follower plate pressure,
since the media is forced towards the suction port.
This also makes it possible to prevent the follower
plate from getting stuck, for example on a seam.
Designations of the components
shown (Figure A – I)
1 Pump lifter
2 Pneumatic cylinder
3 Pump
4 One-hand remote
5 Control lever
Raise-

Hold-

Lower-

6 Bleed valve
7 Bottom plate
8 Pump air connection
9 Media outlet
10 Container stop
11 Follower piston plate
12 Pump START- STOP-
13 Pump pressure gauge/ pressure regulator
14 Shut-off valve / Mains supply On- Off-
15 Follower plate pressure gauge / pressure
regulator
16 Casters LR (option)
17 Feet SF (option)
18 Connection block with bleeder AB (option)
19 Empty notification limit switch (option)
20 Audible empty signal L (option)
21 Empty signal volume control L (option)
EN