EN
24
Safety Warning
Read this operating manual carefully to familiarise yourself with the safe and efficient
operation of the product. Retain this manual as a reference. This operating manual
contains important provisions and information for the safe and proper operation of the
product. It is also intended to help operating and maintenance personnel to minimise
hazards, repair costs and downtime, and to improve the reliability and service life of
the product. It is therefore important to ensure access to this document at all times
for any person assigned to the care of the product.
Intended Use
The product may be used only under the intended operating conditions. Any other
use in excess of this is considered improper. The manufacturer is not liable for
damages due to improper use. Intended use includes:
•
Observing and complying with all notices and warnings in this operating
manual.
•
Performing all inspection and maintenance work.
Operator’s Obligations
The person responsible for the safety of the product has to ensure that:
•
only qualified personnel are assigned to work on the product,
•
the operating manual is always available to said personnel during all work, and
the personnel are obliged to consistently follow it,
•
the rules and regulations for accident prevention applicable to the place of use,
as well as compliance with maintenance and servicing work, must be
observed.
Basic Safety Instructions
The following must be observed for the safe handling and trouble-free operation of
this product:
•
Using the product for other than its intended use is prohibited.
•
No changes may be made to the product.
•
A safe operating state has to be maintained at all times. Upon request, we can
provide equipment training to bring your personnel up to the required level of
knowledge.
•
Disconnect the product from all energy sources prior to any maintenance work.
•
All lines, hoses and screw connections must be inspected for leaks and
externally visible damage at regular intervals. Damage has to be repaired
promptly by qualified personnel; damaged parts must be replaced with original
parts.
•
Protective devices may only be removed after the product is standing still and
has been secured to prevent restarting.
