12
Assembly of Threshold Ramp
Carefully read the manual before starting the assembly.
1
Place the first part of layer 2
onto layer 1.
4
Attach all the parts of the 1st
row.
5
Continue with the 2nd row.
6
The end result of the
two assembled layers.
2
You can attach the first click connector with a firm tap of the
hammer (always use the strike plate). Use the indicated direction
and hold the hammer in the right position.
B
If you want to attach the Threshold Ramp to
stone, you must place the three supplied large
washers on the bottom layer.
A
Place the plastic parts on a flat surface.
