13
C
Now determine if you will have to adjust the height.
Determine if the fitting plate will have to be
modified to achieve the correct height.
Remove the half-size fitting plate using the supplied sloping connector and cut all fitting plates to the
correct size.
Rotate the half-size fitting plate 90 degrees and place it onto a plate part. Attach it with a firm tap of the
hammer (always use the strike plate). Determine where you may have to shorten the fitting plate based
on the best fitting height. Cutting lines are present on the plate for this.
When using a full fitting plate: full
max. height of the set.
When using 2/3 of the fitting
plate: full height minus 5mm.
When using 1/3 of the fitting
plate: full height minus 10mm.
