Ap1400 Installers’ Guide Page 9 of 16
9
UNIT DIMENSIONS
(All dimensions in mm)
10 MECHANICAL FIXINGS
The Ap1400 has several fixing options to suit a variety of installations;
10.1 BACK FIXING
1) Prepare the panel aperture as described below.
2) Fit the printer into the panel using M3 machine screws being careful not to screw more than 5mm
in to the Ap1400.
3) Open the lid of the printer, fit a paper roll and close the lid.
4) Connect power and data leads as described in the ‘
Connection Guide’
in this document.
Panel aperture as
viewed from rear
