| Description of the individual apps of the eMS home –
Dashboard
26
Description of the individual apps of the eMS home
The dashboard of the eMS home web interface (see below) provides basic information about the system and allows
access to individual apps at any time. These are described in more detail in the following sections.
Dashboard
The dashboard contains the
Energy balance
1
and
Phase values
2
widgets.
The value
4
displayed centrally in the
Energy balance
widget shows the current active power in kW.
The arrows indicate whether the entire system is drawing power or feeding it into the electricity grid: the upper
arrow represents the power being drawn, while the lower arrow represents the power being fed in.
The current state is indicated by a green, dashed arrow: in the illustration above, the system is currently drawing
power from the grid
6
.
The inactive state is represented by a grey, solid arrow
5
.
The upper value on the arrow
7
shows the meter reading for the drawn power (active energy in kWh) over the
entire operating time. The lower value
8
indicates the meter reading for the power fed in (active energy in kWh)
over the entire operating time.
The
Phase values
widget on the right shows the current measured values for the current, voltage, and power
factor for all three outer conductors (L1, L2, L3).
The lower section
3
lists the other available apps, which can be accessed via these buttons and via the sidebar at
the touch of a button.
