| System installation –
Configuration via the ABL Configuration Software
18
NOTE
Adaptation of further configuration options
If necessary, you can now adjust other parameters for the charging station such as
Max. set charging current
.
6
Now press the
Group configuration
button to
switch to that tab and enter the address of the charg-
ing station.
7
Click the
Scan
button on the right-hand side.
8
To change the address of the charging station, enter
the current address value in the left-hand field (in this
example:
3
).
9
Now enter the new destination address for the charg-
ing station in the right-hand field (in this example:
6
).
10
Now click the
Address manually
button.
y
The new address value is now activated.
11
Set the RCD of the addressed charging station to po-
sition
0
.
I
12
Repeat steps
2
to
11
for all other charging stations in
the group, leaving all already addressed charging sta-
tions switched off.
13
After addressing all charging stations, set the RCDs
of all charging stations to position
I
.
I
After completing the configuration, you can exit the
ABL Configuration Software
and disconnect the data cabling
with the computer via the CONFCAB cable.
