Replacing the lever lock in an RCCB flap |
53
4
Check the replaced RCCB flap to ensure that it moves
freely and then lock it with the key.
Replacing the lever lock in an RCCB flap
You can replace the lever lock in one of the side RCCB flaps if the lock is defective or if, for example, you want to set
up an individual locking circuit for a charging park or similar.
End customer
Specialist electrical
contractor
Construction
Required components:
Number / spare part
100000257 / Spare part eM4 lock 1 key
Accessories
Key for RCCB flap /lever lock, supplied with the wallbox and the spare part
Tool
Torx T 15 screwdriver, slotted screwdriver of suitable size
NOTE
Changing the lock system
ABL offers different types of locks for the Wallbox eM4 Twin, which can be ordered as accessories (see "Acces-
sories" on page 20).
Locking circuit A:
In locking circuit A there are 10 packages to choose from, each with 10 individual locks
with the same closure. A group key is not offered.
Locking circuits B to H:
In locking circuits B to H, 7 packages are offered, each with 10 individual locks with
different closures. A group key is supplied for each package.
Proceed as follows to replace the lock in an RCCB flap:
1
Follow steps 1 and 2 in the section "Replacing the
RCCB flap" to remove one or both RCCB flaps.