![background image](http://html.mh-extra.com/html/enerwatt/ewc612-1/ewc612-1_user-manual_2411715001.webp)
1
MODEL: EWC612-1
USER’S MANUAL
IMPORTANT SAFETY INSTRUCTION
USER MANUAL -
BATTERY CHARGER
PLUS BATTERY MAINTAINER AND REJUVENATOR
BATTERY CHARGER
FOR 6/12 VOLT LEAD-ACID BATTERIES
MODEL NO.: 612-1
1. WARNING
EXPLOSIVE GAS RISK. WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. EXPLOSIVE GASES DEVELOP DURING
NORMAL BATTERY OPERATION. IT IS IMPORTANT THAT YOU READ THIS MANUAL BEFORE USING YOUR CHARGER AND FOLLOW
THE INSTRUCTIONS EXACTLY EACH TIME YOU USE IT.
1.1 This appliance is not intended for use by people (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they are supervised or have been given instruction concerning the use of the
appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with
the appliance.
1.2 To reduce risk of battery explosion, follow these instructions and those published by battery manufacturer and manufacturer
of any equipment you intend to use in vicinity of battery. Review cautionary marking on these products and on the engine.
1.3 Do not expose the charger to rain, snow, or liquids.
1.4 Use of an attachment not recommended or sold by the battery charger manufacturer may result in fire, electric shock
or personal injury.
1.5 To reduce the risk of electric shock, unplug the charger from the AC outlet before attempting any maintenance or cleaning.
1.6 To reduce the risk of damage to the electric plug and cord, pull at the plug rather than the cord when disconnecting the charger.
1.7 An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in fire
and electric shock. If an extension cord must be used, make sure that the pins on the plug of the extension cord are the same
number, size and shape as those of the plug on the charger. Also ensure that the extension cord is properly wired and in good
electrical condition and that the wire size is large enough for the AC ampere rating of the charger as specified in the following
table:
RECOMMENDED MINIMUM AWG SIZE FOR
EXTENSION CORDS FOR BATTERY CHARGERS
SAVE THESE INSTRUCTIONS – THIS MANUAL CONTAINS
IMPORTANT SAFETY AND OPERATING INSTRUCTIONS
FOR BATTERY CHARGER 612-1
READ ENTIRE USER MANUAL BEFORE USE
Length of cord (feet):
25
50
100
150
AWG cord size:
16
16
16
14