Important InformatIon
1
Important information
Preface
This manual describes the mechanical and electrical installation of the ABL Wallbox.
The working steps described in this manual must only be carried out by qualified spe-
cialist personnel (mechanical installation) and qualified specialist electrical contractors
(electrical installation), who, on the basis of their specialist training, knowledge and ex-
perience as well as their knowledge of the relevant regulations, can assess and carry
out the working steps described in this installation manual and recognize potential
hazards.
The ABL Wallbox model variants can be identified by the ABL model number on the
product label located on the internal electronic components cover. Always make sure
before installation that your model variant is the one described in this installation man-
ual!
Model variants covered by this manual
3W2205 eMH3 Single with charging cable and 22 kW max. output
3W2207 eMH3 Single with charging socket and 22 kW max. output
3W2209 eMH3 Single with charging socket and shutter, 22 kW max. output
3W2214 eMH3 Twin with charging sockets and 2 x 11 kW or 1 x 22 kW max. output
3W2217 eMH3 Twin with charging sockets and shutter, 2 x 11 kW or 1 x 22 kW
max. output
3W4401 eMH3 Twin with charging sockets and 2 x 22 kW max. output
About this manual
This manual documents the steps and settings required for installing the wallboxes,
taking them into operation as well as for resolving malfunctions during operation. For
quick and easy reference, certain sections of this manual are specially formatted.
• Descriptions listing equally applicable options (as is the case here) are indicated by
bullet points.
• Descriptions that describe performing a function are shown in the form of numerical
lists indicating the order of the individual working steps.
Please make sure you read this manual carefully and ensure in particular that you fol-
low all safety notices given in this manual.
All measurements in this manual are in millimeters.
Please note that all technical details, specifications and design characteristics of the
product may be changed without prior notice.