5
Main interface
l
Power supply 1, 2, 3 and 4
The output operating status of rear panel CH1, 2, 3 and 4, with the
flashing for the forced insertion status;
l
Week: Hour: minute: second
The present specific week day and time (24 hours system);
l
Next timer point:
The specific week day and time (24 hours system) of the latest
programmable timer point;
l
！
The present valid alarm signal input of the rear panel ports
ALM1 IN
or ALM2 IN
;
l
The controlled peripheral equipment
CD
is playing at present;
l
The controlled peripheral equipment
tuner
is playing at present;
l
The controlled peripheral equipment
player deck
is playing at
present;
l
The controlled peripheral equipment
digital recorder
is playing at
present;
l
CHIME OUT
port at the rear panel with chime signal output at
present.
Programming
l
Programming operation
Press
DIGITAL WHEEL
to enter
operation entry
interface at the main
display interface.
1.
Adjusting time Operation entry
interface has four entries
: Timer programming, adjusting time,
duplicate timer and exit setup
. Rotate the digital wheel to select the
adjusting time entry
, pressing
digital wheel again to enter the interface for
adjusting time
. Rotate the digital wheel to select the entry
to be adjusted, press the digital wheel to make the cursor of
▲▼
appeared behind the entry; Then
rotate the digital wheel to adjust the parameter, and press the digital wheel to exit from the adjusting.
Press the confirm entry after adjusting properly the other parameters following the method given above,
the adjustment made will take effect right away and the system will return back to the
operation entry
interface; Press the
cancel
entry, all the adjustment will be invalid and the system will return back to
the
operation entry
interface. Press the
exit setting
entry of the
operation entry
interface to return
Power
1 ON
2 OFF
3 ON
4 OFF
Friday
13 : 38 : 26
Next timer point: 17:30 Friday
