3-6
Chapter 3
[Yes]:
The system automatically detect the unused DIMM and PCI slots, and stop sending clock signal to
these unused PCI slots.
[No]:
The system always send clock signal to all PCI slots.
NOTE:
Set this option to [No] setting if there are adapters that cannot be automatically detected by the
system and will cause malfunction.
3-3. Advanced Chipset Features
DRAM Timing Control:
Click <Enter> key to enter its submenu:
Memory Timing:
Enables you to select the CAS latency time in HCLKs of 2, 2.5, or 3. The value is set at the factory
depending on the DRAM installed. Do not change the values in this field unless you change specifications
of the installed DRAM or the installed CPU.
CAS Latency Time
This item controls the timing delay (in clock cycles) before the DRAM starts a read command after
receiving it.
SG-72
