Abit NI8 SLI Series User Manual Download | Manualshive

Page: 47 / 88

background image

BIOS Setup

3-17

First Boot Device / Second Boot Device / Third Boot Device / Boot Other Device:

Select the drive to boot first, second and third in the [First Boot Device], [Second Boot Device], and
[Third Boot Device] items respectively. The BIOS will boot the operating system according to the
sequence of the drive selected. Set [Boot Other Device] to [Enabled] if you wish to boot from another
device other than these three items.

NOTE:

To enable the onboard LAN Boot function, the item “LAN Boot ROM” in the " OnChip PCI

Device" menu must be set to [

Enabled

], and then the drive "Nvidia Boot Age" in this “Boot Device”

menu must be selected.

Boot Up Floppy Seek:

When set to [Enabled], the BIOS will check whether the floppy disk drive is installed or not.

Boot Up NumLock Status:

This item determines the default state of the numeric keypad at system booting up.

[On]:

The numeric keypad functions as number keys.

[Off]:

The numeric keypad functions as arrow keys.

Security Option:

This item determines when the system will prompt for password - every time the system boots or only
when enters the BIOS setup.

[Setup]:

The password is required only when accessing the BIOS Setup.

[System]:

The password is required each time the computer boots up.

NOTE:

Don’t forget your password. If you forget the password, you will have to open the computer case

and clear all information in the CMOS before you can start up the system. But by doing this, you will
have to reset all previously set options.

MPS Version Control

For OS:

This item specifies which version of MPS (Multi-Processor Specification) this motherboard will use.
Leave this item to its default setting.

Delay For HDD (Secs):

This item allows the BIOS to support some old or special IDE devices by prolonging this delay time. A
larger value will give more delay time to the device for which to initialize and to prepare for activation.

Full Screen LOGO Show:

This item determines to show the full screen logo when booting.

User’s Manual

«
...
45
46
47
48
49
...
»

Summary of Contents for NI8 SLI Series

























































































Reviews:

No comments

Related manuals for NI8 SLI Series

Brand: Yamaha Pages: 82

A75A-G35 Series

Brand: MSI Pages: 72

Brand: Supermicro Pages: 2

Brand: Analog Devices Pages: 24

Brand: Gigabyte Pages: 96

MBATX-845GV-VEAH

Brand: Kontron Pages: 70

Brand: EPOX Pages: 68

Brand: IWILL Pages: 48

Brand: VIA Technologies Pages: 86

Brand: Gigabyte Pages: 44

Brand: JETWAY Pages: 46

Brand: Freescale Semiconductor Pages: 160

NCP45491PMNGEVB

Brand: ON Semiconductor Pages: 9

Brand: Evalue Technology Pages: 91

Brand: Gigabyte Pages: 88

Brand: Fujitsu Pages: 30

LPC1768-MINI-DK2

Brand: Haoyu Electronics Pages: 4

Brand: DFI Pages: 171

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands