Abit NI8 SLI Series User Manual Download Page 22

Page: 22 / 88

2-14

Chapter 2

S/PDIF Connection:

Along with the motherboard package you can find an audio daughter-card for S/PDIF connection.

•

S/PDIF Input Connection:

1. Plug the end with 3.5mm adapter into the [Line-In] jack on this daughter-card. (This jack is

used for either optical or line input.)

2. Remove the rubber protection-cap at the other end. Plug it into the [Digital-Out] (SPDIF-Out)

jack on your digital multimedia device.

•

S/PDIF Output Connection:

1. Pull out the 3.5mm adapter at one end. Keep this adapter with its protection-cap covered in

save place. Plug the rest of this end into the [SPDIF-Out] jack on this daughter-card.

2. Remove the rubber protection-cap at the other end. Plug it into the [Digital-In] (SPDIF-In) jack

on your digital multimedia device.

NI8 SLI Series

Summary of Contents for NI8 SLI Series

























































































Search results

Summary of Contents for NI8 SLI Series

Reviews:

Related manuals for NI8 SLI Series

Brands by name

Popular brands

Abit NI8 SLI Series, User Manual

Search results

Summary of Contents for NI8 SLI Series

Reviews:

Related manuals for NI8 SLI Series

Brands by name

Popular brands