Abit NF8 Pro, User Manual

Page: 43 / 72

BIOS Setup 3-17
3-6. Power Management Setup
Phoenix – Award WorkstationBIOS CMOS Setup Utility
Power Management Setup
ACPI Suspend Type S3(Suspend-to-RAM Item Help
Power Button Function Instant-Off
Restore on AC Power Loss Power Off
CPU Thermal-Throttling 50.0 %
Cool’n’Quiet Control Disabled
POWER ON Function BUTTON ONLY
X - KB Power ON Password Enter
X - Hot Key Power ON Ctrl-F1
Wake-Up by PME# of PCI Enabled
Wake-Up by OnChip LAN Enabled
Wake-Up by Ring Disabled
Resume by OnChip USB Enabled
POWER ON by Alarm Disabled
X - Date(of Month) Alarm 0
X - Time (hh:mm:ss) Alarm 0 : 0 : 0
↑↓
:Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
ACPI Suspend Type:
This item selects the type of Suspend mode.
[S1(PowerOn-Suspend)]: Enables the Power On Suspend function.
[S3(Suspend-To-RAM)]: Enables the Suspend to RAM function.
Power Button Function:
Two options are available: Delay 4 Sec or Instant-Off. The default setting is Instant-Off . It is activated
when the user presses the power button for more than four seconds while the system is in the working
state, then the system will transition to the soft-off (Power off by software). This is called the power
button over-ride.
Restore on AC Power Loss:
This item selects the system action after an AC power failure.
[Power Off]: When power returns after an AC power failure, the system’s power remains off. You must
press the Power button to power-on the system.
[Power On]: When
power returns after an AC power failure, the system’s power will be powered on automatically.
[Former-Sts]: When power returns after an AC power failure, the system will return to the state where
you left off before power failure occurs. If the system’s power is off when AC power failure occurs, it
will remain off when power returns. If the system’s power is on when AC power failure occurs, the
system will power-on when power returns.
User’s Manual