Abit KR7A, User Manual

Page: 96 / 104

D-2 Appendix D
KR7A/KR7A-RAID
-
Example 2:
With a system including the motherboard (with CPU, DRAM, COAST...) HDD,
CD-ROM, FDD, VGA CARD, LAN CARD, MPEG CARD, SCSI CARD, SOUND
CARD, after assembly and after having installed the Sound Card Driver, when you restart
the system, when it runs the Sound Card Driver, it resets automatically. This problem
may be due to the Sound Card Driver. During the Starting DOS… procedure, press
SHIFT (BY-PASS) key, to skip CONFIG.SYS and AUTOEXEC.BAT; edit
CONFIG.SYS with a text editor, and in function the line that loads the Sound Card
Driver, add a remark REM, in order to disable the Sound Card Driver. See the example
below.
CONFIG.SYS:
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE HIGHSCAN
DOS=HIGH, UMB
FILES=40
BUFFERS=36
REM DEVICEHIGH=C:\PLUGPLAY\DWCFGMG.SYS
LASTDRIVE=Z
Restart the system. If the system starts and does not reset, you can be sure that the
problem is due to the Sound Card Driver. Write down the Sound Card model,
motherboard model, BIOS identification number on the technical support file (refer to
main instructions), and describe the problem in the space provided.
☺☺☺
We will show you how to fill the “ Technical Support Form ”.
00
Main instructions...
To fill in this “ Technical Support Form ”, refer to the step-by-step instructions given below:
1
*
. MODEL: Note the model number given in your user’s manual.
Example: KR7A, KR7A-RAID, KG7-LITE, KG7, KG7-RAID, etc…
2
*
. Motherboard model number (REV):
Note the motherboard model number labeled on the
motherboard as “ REV:*.** ”.
Example: REV: 1.01
3
*
. BIOS ID and Part Number
: See
Appendix C
for detialed information.
4. DRIVER REV: Note the driver version number indicated on the DEVICE DRIVER disk (if have)
as “ Release *.** ”. For example: