Chapter 3
KR7A-133/KR7A-133R
3-28
!
User Define:
“
User Define
” defines the delay for accessing the power modes.
"
HDD Power Down:
Disabled
)
1 Min
)
2 Min
)
3 Min
)
4 Min
)
5 Min
)
6 Min
)
7 Min
)
8 Min
)
9 Min
)
10 Min
)
11 Min
)
12 Min
)
13 Min
)
14 Min
)
15 Min. The default setting is
Disabled
.
"
Suspend Mode:
Disable
)
1 Min
)
2 Min
)
4 Min
)
6 Min
)
8 Min
)
10 Min
)
20 Min
)
30 Min
)
40
Min
)
1 Hour. The default setting is
Disabled
.
When the two saving modes are enabled, the system is set up for minimum or maximum power
savings.
!
Min Saving:
HDD Power Down = 15 Min
Suspend Mode: 1 Hour
!
Max Saving:
HDD Power Down = 1 Min
Suspend Mode: 1 Min
Video Off Option:
Two items available: Always On or Suspend -> Off. The default setting is
Suspend -> Off
. This item lets
you select whether the video is always on or whether the video will turn off when suspend is active.
Video Off Method:
Three video off methods are available: Blank Screen
)
V/H SYNC+Blank
)
DPMS Support. The
default is
V/H SYNC + Blank
.
If this setting does not shut off the screen, select
Blank Screen
. If your monitor and video card support
DMPS standard, select
DPMS Support
.
Modem Use IRQ:
Eight items available: NA
)
3
)
4
)
5
)
7
)
9
)
10
)
11
)
Back to NA. The default setting is
NA
. You can specify the IRQ for modem use.
Soft-Off by PWRBTN:
Two items available: Delay 4 Sec or Instant-Off. The default setting is
Instant-Off
. It is activated when
the user presses the power button for more than four seconds while the system is in the working state,
then the system will transition to the soft-off (Power off by software). This is called the power button
over-ride.
State After Power Failure:
This setting lets you set the system action after a power failure. Three options are available: Auto
)
On
)
Off. The default setting is
Off
. This item lets you set the system power state when power recovers. If
you set it to
Off
, when power returns, whatever state your computer was in before the power failure, the
system will always turn off. If you set it to
On
, when power returns, whatever state your computer was in
before the power failure, the system will always turn on. If you set it to
Auto
, when the power returns, the
computer return to the previous power state.
Summary of Contents for KR7A-133
