Abit BP6, User Manual

Page: 19 / 102

Installing the Motherboard 2-7
User’s Manual
ATX: ATX Power Input Connector
Caution
If the power supply connectors are not properly attached to the ATX power supply, the
power supply or add-on cards may be damaged.
Attach the connector from the power supply
to the ATX connector here. Remember you
have to push the connector from the ATX
power supply firmly to the end with the
ATX connector, insuring that you have a
good connection.
Note: Watch the pin position and the
orientation
FAN 1/2/3: FAN Headers
Attach the connector from the individual
CPU1 fan to the header named FAN1, and
attach the CPU2 fan to the FAN2 header.
The FAN 3 speed can’t be monitored by the
system and can’t be turned off.
You must attach the CPU fan to the
processor, or your processor will work
abnormally or may be damaged by
overheating. Also, if you want the computer
case’s internal temperature to be kept steady
and not too high, you had better connect the chassis fan to reach this goal.
Note: Watch the pin position and the orientation