Abit BD7-E Page 71 User Manual Download

Page: 71 / 72

How to Get Technical Support

H-3

North America and South America:

ABIT Computer (U.S.A.) Corporation

45531 Northport Loop West,
Fremont, California 94538, U.S.A.
Tel: 1-510-623-0500
Fax: 1-510-623-1092

[email protected]

http://www.abit-usa.com

U.K. and Ireland:

ABIT Computer (U.K.) Corporation Ltd.

Unit 3, 24-26 Boulton Road,
Stevenage, Herts SG1 4QX, U.K.
Tel: 44-1438-228888
Fax: 44-1438-226333

[email protected]

Germany, Benelux (Belgium, Netherlands,
Luxembourg), Denmark, Norway, Sweden,
Finland, and Switzerland:

AMOR Computer B.V. (ABIT’s
European Office)

Van Coehoornstraat 7,
5916 PH Venlo, The Netherlands
Tel: 31-77-3204428
Fax: 31-77-3204420

[email protected]

http://www.abit.nl

Austria, Czech, Romania, Bulgaria,
Yugoslavia, Slovakia, Slovenia, Croatia,
Bosnia, Serbia, and Macedonia:

Asguard Computer Ges.m.b.H

Schmalbachstrasse 5,
A-2201 Gerasdorf/Wien, Austria
Tel: 43-1-7346709
Fax: 43-1-7346713

[email protected]

Japan:

ABIT Computer (Japan) Co. Ltd.

Fax: 81-3-5396-5110

http://www.abit4u.jp

Shanghai:

ABIT Computer (Shanghai) Co. Ltd.

Tel: 86-21-6235-1829
Fax: 86-21-6235-1832

http://www.abit.com.cn

Russia:

ABIT Computer (Russia) Co. Ltd.

Fax: 7-095-937-2837

[email protected]

http://www.abit.ru

France, Italy, Spain, Portugal, and
Greece:

ABIT Computer France SARL

Tel: 33-1-5858-0043
Fax: 33-1-5858-0047

http://www.abit.fr

All other territories not covered above please contact Taiwan Head Office:

When contacting our headquarters please Note we are located in Taiwan and we are 8+ GMT
time. In addition, we have holidays that may be different from those in your country.

ABIT Computer Corporation

No.323, Yang Guang St., Neihu, Taipei, 114, Taiwan
Tel: 886-2-8751-8888
Fax: 886-2-8751-3382

[email protected]

http://www.abit.com.tw

User’s Manual

Summary of Contents for BD7-E









































































Search results

Summary of Contents for BD7-E

Reviews:

Related manuals for BD7-E

Brands by name

Popular brands

Abit BD7-E, User Manual

Search results

Summary of Contents for BD7-E

Reviews:

Related manuals for BD7-E

Brands by name

Popular brands