15
STEP 13
Hold the assembly up against a solid wall.
Make 4 positioning marks on the solid wall according to the positions from
Upper Wall Mounting
Bracket (9)
and
Lower Wall Mounting Bracket (8)
.
Drill 4 holes based on the positioning marks.
STEP 14
Attach and tighten the assembly to the solid wall using: 4 PCs of
ST8x50mm Socket Head Cap
Screw (54)
and
Flat
Washer Φ22xΦ9x2.0mm (55)
.
NOTE: Fully tighten bolts at end of this step.
55
55
8
D
54
55
54
55
9
#88 Wrench 13-15
#54 M8X50mm 4PCS
#55 Large M8 4PCS
54
54
