Abilia Gewa Control 10, Manual, Page: 32 / 56

32
Button Labelling
The buttons on your Control 10 are marked with numbers as
standard. The numbered label can be replaced with a
personalised design. On Abilia’s website it is possible to
create your own button labels using pre-designed templates
with symbols and text.
The document can also be downloaded. The labeling is
printed on a clear sheet or white paper and inserted through
the slit on your Control 10. Before the button label is inserted,
the keyguard must be removed.
A plastic leg at each corner holds the keyguard. Put a knife
blade between the keyguard and Control 10. Remove the
keyguard carefully and smoothly, otherwise the plastic legs
may break.
Two A4 sheet for making notes is included with your
Control 10.
Control 10 Holders
Rubber feet are mounted on the underside so that your
Control 10 can lie still on flat surfaces. In some cases Control
10 needs to be permanently mounted. As an additional
accessory, there is a holder, which can be secured to Control
10. This holder can in its turn be mounted on a table with a
‘G’ clamp or attached to a tube with a ‘U’ clamp. The holder
can also be mounted on a mobile stand.
Another option is to hang your Control 10 around the neck. A
neck strap is supplied with your Control 10.
Warning!
The string lock is a safety feature to prevent strangling. Make sure that the ends of the neck
strap can be pulled out eg. if the transmitter gets caught on something. Never make knots in
the neck strap!
Label
Keyguard