26(29)
2.17 Control Omni stops transmitting an IR-signal after approx.
10 sec
When pressing a control switch or touching the screen directly to transmit an IR-
signal Control Omni stops transmitting after approx. 10 sec. This is a safety feature
that you may not accidently transmit a too long IR-signal.
From SW version 1.1.8 this function has been changed to 60 sec.
Upgrade Control Omni to the latest version if needed.
2.18 "Call is waiting" does not work.
Control Omni does not support the feature ”Call is waiting” when using a mobile
phone. We recommend you to turn off this feature with the mobile phone operator.
2.19 Control Omni gets blocked and the user cannot restart
Control Omni
Occasionally Control Omni gets blocked so that the user has no way to restart
Control Omni with his control switch.
From software version 1.2.5, it is possible for the user to restart Control Omni when
it is blocked. NOTE! This applies to users who use a control switch for controlling
Control Omni.
How can I do to get this function?
1.
Download the software from Abilia website and upgrade Control Omni. See
on the website how to do this.
http://www.abilia.com/en/service-and-support/software-updates/software-
updates-environmental-control/upgrade-control-omni
2.
Go to settings in Control Omni to activate Ext. Reboot.
Pathway:
System
Alert function
Ext. Reboot
3.
To test this function by holding down the control switch in about 30 to 60
seconds until the Control Omni restarts. Meanwhile, any alert functions will be
activated. This is a safety issue!
Let the user test the function to learn how it works. In a sharp situation you do
not need to hold the control switch that long.
