Abilia 429240-1, User Manual

Page: 33 / 56

33
Setting the channel group
Your Control Medi has the option to set different channel groups for the transmitter to operate within.
When the change of channel group is applied, programmed channels will disappear.
Normally, the channel group does not need to be changed. If several GewaLink transmitters are to
be used in the same area and you do NOT want to control the same equipment, it may be
necessary to use different channel groups.
Table 3 shows the different settings.
Table 3: Channel groups
Channel range, GewaLink channels
00-15
1
16-31
2
32-47
3
48-63
4
Channel group
1
00-03 16-19 32-35
48-51
Channel group
2
04-07 20-23 36-39
52-55
Channel group
3
08-11 24-27 40-43
56-59
Channel group
4
12-15 28-31 44-47
60-63 1
1
Channel 62 is a stop code and cannot control any function. On the other hand you can store channels/codes
on this button which in turn can control a function.
Do as follows to set the
Channel group :
1. First press
4
and then simultaneously press
2
for 2 seconds. When you release the buttons
the “Setting” alert sounds and the indication lamp on button 2 flashes.
2. Press
4
.
3. Choose the Channel range
1
to
4
according to table 3 above.
4. Choose the Channel group
1
to
4
according to table 3 above.
5. If the action is successful, the “Success” alert sounds. If something goes wrong or takes too long,
the “Error” alert sounds.
Set channel group
4
+
2
2 sec ,
4
,
choose Channel range , choose Channel group .
See
Table 3
for choice of channel range and channel group.
Default setting: GewaLink channel 16-19