Abilia 429240-1, User Manual

Page: 27 / 56

27
Settings
Below is described how to program your Control Medi for different setting options.
To enter the programming mode, you should first press Button
4
and then simultaneously press
the button
X
for 2 seconds for your desired setting option (see below). When you release the
buttons a “Setting” alert is heard, and the indication lamp on the button for the setting option flashes.
An “Error” alert will sound if you select an invalid setting option.
Press simultaneously Setting option
4
+
1
2 sec
Function
4
+
2
2 sec
System
4
+
3
2 sec
Reset
This is followed by different button presses depending on what is to be set, see the separate
descriptions below.
It is important not to wait too long between the different steps when programming. After a certain
time your Control Medi automatically leaves the programming mode to save power.
If your programming is successful, a “Success” alert will sound. If something has gone wrong or
takes too long, an “Error” alert will sound.
Alerts when programming
Whilst you are programming, your Control Medi gives feedback with flashes and different alerts:
“Setting” - (three increasing tones).
“Success” - (three positive tones).
“Error” -
(eight negative tones).
Cancel Programming
To cancel the programming, you can press Button
4
and keep it pressed for two seconds. It works
as a
Reset
button.
Locking/Unlocking the Settings Lock
In order to protect the programmed settings in your Control Medi, Settings Lock can be activated.
When the Setting Lock is enabled, the settings are protected. If you try to change the settings
without first unlocking, the “Error” alert is given.
Do as follows to lock/unlock the Settings Lock:
1.
First press
4
and then simultaneously press
1
for 2 seconds. When you release the buttons
the “Setting” alert sounds and the indication lamp on button 1 flashes.
2.
Press
3
.
3.
Press
1
to unlock the Settings Lock, or
2
to lock.
4.
If the action is successful, the “Success” alert sounds. If something goes wrong or takes too long,
the “Error” alert sounds.
Locking/Unlocking the Settings Lock
Press
4
+
1
2 sec
,
3
, then press your desired option
1
or
2
.