Overview of pager and charger
Install pager
1.
Pull out the battery tab on the pager and charger to start the units.
2.
Plug the charger into a mains socket. The power LED
will light up to
show that it is connected. Place the pager in the charger and check that
it clicks into place. The charging LED
will blink/light up to show that
it’s charging.
Note:
Remember to charge the pager for 6 hours before using it for the first time.
When fully charged, the charging LED
will turnoff.
EN
How to use the pager
When a sensor is activated, the pager will sound and vibrate. Thediodecol- our
and flashing pattern shows which transmitter/sensor has been activated.
If you want to
Do this
Switch off the pager alarm
•
Press the pager
Acknowledge button.
Mute the alarm
•
Push the pager
Sound switch
up/down.
Switch the pager on/off
•
Push the pager
On/Off switch
right/left.
28
Chapter 2
Install pager.
Chapter 2
Install pager.
29
1
”click”
2
Sensor 1
Sensor 2
Sensor 3
Test button
Transmitter 1 Transmitter 2
Transmitter 3 Transmitter 4
Sound On/Off
Replaceable
label
No coverage
Transmitter
error
Low pager
battery
Acknowledge
button
Power
indicator
Charging indicator
